GAP驗廠簡介，GAP質量審核技術規范-實驗室問題及相關要求

人氣瀏覽: (2477) 發布時間: [2022-01-13]

GIS QA Technical Evaluation Scope
CONFIDENTIALITY: The information, comments and opinions contained in the report including any and all attached photographs, copies of reports and similar documents are for the use of the Gap Inc. business units and its subsidiary companies. Do not distribute or photocopy this report without receiving prior written consent from GIS VQM department.

Section	Q no.	Question
Lab 實驗室	1	What is the sampling size for raw material/ trims test conducted per style in-house or 3rd party lab? 內部或第三方實驗室的原材料/輔料測試每款抽樣多少？
Lab	2	Is there an on-site, appropriately equipped laboratory in size, lighting, temperature and humidity? 是否有核可的內部實驗室，在大小、照明、溫濕度方面符合標準？
Lab	3	Is your laboratory set up certified by other major U.S. companies / 3rd party international lab? If yes. By who? 內部實驗室是否通過美國大公司或第三方國際實驗室的認證？如是，請說明認證方
Lab	4	Are critical laboratory tests performed (either in house or use 3rd party lab) per PO/style and result used by production for problem prevention and records are well kept? 是否根據訂單號/款號來做測試（內部或第三方），測試結果是否用于生產過程防止問題發生，相關記錄是否保存完好？
Lab	5	Are shrinkage/durability tests conducted correctly and completely for each bulk lot with record? 每個批次產品是否都有做縮水/耐久性測試并保存記錄？

Question 4 - full list for score 3 per category:

Denim/Woven

1.Fabric weight (ASTM D 3776 Option C)

2.Dimensional stability test (AATCC 135/150, machine wash / tumble dry)

3.pH test (ISO 3071)

4.Crocking (ISO 105-X12)

5.Tear strength (Woven : Elmendorf tester ASTM D1424, Denim ASTM D2261)

6.Tensile strength (Tensile tester ASTM D5034)

Knit / IP

1.Fabric weight (ASTM D 3776 Option C)

2.Dimensional stability test (AATCC 135/150, machine wash / tumble dry)

3.pH test (ISO 3071)

4.Crocking (ISO 105-X12)

5.Bursting strength (ASTM D3786)

6.Pilling resistance (ASTM D3512)

Sweater

1.Yarn size (ASTM D1057)

2.Yarn Twist (ASTM D1423)

3.Dimensional stability test (AATCC 135/150, machine wash / tumble dry)

4.Crocking (ISO 105-X12)

5.Single yarn strength (ASTM D2256)

6.Pilling resistance (ASTMD3512, Woven: IWS152)

Accessories

1.Tensile strength (Tensile tester)

2.Small parts attachment strength (Pull gauge)

3.Crocking (ISO 105-X12)

4.XRF laser gun (lead content screening)

如果企業想做驗廠輔導，不妨考慮一下創思維驗廠之家，創思維驗廠之家是專業的驗廠輔導公司，已經為全國各地上萬家企業服務過，在全國多處設有辦事處，會就近安排老師進場輔導，我們的輔導原則是幫助企業通過驗廠，深圳市創思維是一家正規專業的驗廠咨詢、驗廠輔導、認證輔導公司，一切以合同條款為準，不亂收費，并盡可能為企業節約成本，通過后付款！